Breville 800CPXL Die-Cast Stainless-Steel Motorized Citrus Press Review
For those, who are looking for an appliance that will give them a glass of freshly squeezed citrus fruit without using juicer, Breville 800CPXL Die-Cast Stainless-Steel Motorized Citrus Press is certainly a boon, a simple and convenient way to get fresh juices.
Squeezing an orange, grapefruit, lemon or lime may be tedious especially if the user has any arthritic problem or their hands or wrists are paining. In such a condition, squeezing the fruit totally and getting a glassful of juice is quite hard and in that case, Breville 800CPXL comes to users’ rescue.
Breville 800CPXL Specifications
Dimensions: 11 x 18 x 9 inches
Weight: 10.36 pounds
Motor: 100 Watt
Materials: High-quality die-cast metals and stainless steel for housing and plastic for inner components
Features of Breville 800CPXL Citrus Press
Easy and Effortless Operation
A great advantage of Breville 800CPXL is that it’s fully motorized and therefore, users hardly have to exert any effort to get all the juice of any fruit.
Overhead Presser Arm
The overhead presser arm of Breville 800CPXL ensures users don’t have to turn and twist the fruit manually. The arm is ergonomically designed making users need to apply very little effort to create enough pressure to press the fruit down in the cone appropriately. The arm has a soft rubber grip to ensure no slipping of user’s hand during the operation.
Once the arm is pressed down into the cone, the whisper quiet motor of Breville 800CPXL becomes active and spins the fruit automatically against the cone to get up to the last drop of juice from it. The noise of the motor can hardly be heard; however, it’s quite powerful and can totally flush out all the juice and pulp from the fruit.
Stainless Steel Filter Basket
Breville 800CPXL also features a corrosion-resistant stainless steel filter basket that collects the pulp and lets the juice drain through. The filter basket has slots that are large enough to let some of the wholesome pulp out through them, but filter larger chunks. If users want a little to no pulp in their juice, Breville has manufactured a fine pulp filter basket that they can buy separately.
Breville 800CPXL contains specially designed Quadra-Fin cone to get up to the last drop of juice from a range of fruit sizes. The cone has four spines that will penetrate the fruit half and scrape all the juice and pulp from it leaving only the peel behind.
The juice then drips down into a collector and then travels through a spout and then into user’s glass. The spout can be locked in an upright position and no juice will be dispensed, so that users can collect all the juice at once. This is a useful feature while removing the juicer’s parts to make sure there is no spill of any juice.
Assembling Breville 800CPXL is super easy and quick. Users need to start assembling it from base to top. First they have to place the juice collector on the drive shaft atop the motor base. Next, they have to insert the steel filter into the juice collector. After that, they have to place the juicing cone on the drive shaft. Next they will have to insert the fruit dome on the underside of the juice press arm. Finally, they need to make sure if the anti-drip spout is properly pushed down in the pouring position and with that the assembly is finished.
With Breville 800CPXL, a glassful of juice can be extracted within a minute. It extracts 8 ounces of orange juice, Breville 800CPXL takes only a few seconds. Liters of citrus juice can be made with Breville 800CPXL within a few minutes.
The motor will not start unless the arm is lowered and enough pressure is used. This feature protects users from accidentally activating the motor while setting the appliance up for use.
All components of Breville 800CPXL are easily removable and are dishwasher-safe. Thus users don’t have to give them extra scrubbing.
Being small in size, Breville 800CPXL takes up a very small space on the countertop and also can be stored easily in a cabinet.
Juice extracted from Breville 800CPXL is fresh and wholesome because due to the special design of the device the loss of nutrients and enzymes is minimized. Two types of strainers allow users to get juice of their liking i.e. the strainer with bigger slots is perfect for users who prefer a lot of healthy substances in their juice while the filter with smaller slots is ideal for users who prefer less pulp.
Also, users don’t need to worry about any foam or froth in the juice. Only if the machine is too old, there may be some foaming problems. If this happens, users can just replace it.
Breville 800CPXL comes with a 1-year warranty that covers any problem in operation or defective parts. If problems occur due to users’ errors, the warranty doesn’t cover it.
Breville 800CPXL Pros
- Superb design
- Powerful machine
- Easy operation
- Easy cleanup
Breville 800CPXL Cons
- Several users find that the juicer contains inner parts that are made of cheap, low-quality flimsy plastic that crack just after a light use; thus the juicer is strong and durable only to look at due to its metallic body but in fact quite fragile and easily breakable from inside
- Some users find that the cone cannot handle a large grapefruit well or cannot get all the juice from other really large fruits
- Some other users came across a problem of the peels getting stuck on the fruit dome which makes it a bit hard while juicing multiple fruits
- One last issue some users faced is that the cord is too short which can be a problem, if users require any sort of reach at all. This can be overcome by using an extension cord.
All in all, Breville 800CPXL may be a good appliance for users who love a freshly squeezed juice or who regularly use lemon or lime juice in cooking. Also, it offers a simple juicing process as long as it works and cleaning is simple too, making it very interesting choice for busy users.
For more reviews and recommendations, check Breville 800CPXL Die-Cast Stainless-Steel Motorized Citrus Press Amazon link (link opens in the new window).